Product Code: 70-1071-SRG0089
Wrench Adaptor
Prismatik Dentalcraft

Product Description

The Hahn Tapered Implant Surgical Adaptor joins instrumentation with a 4 mm hex connection to a wrench featuring a standard 4 mm square connection, effectively converting a motor-driven instrument into a hand-driven instrument.

  • Machined from corrosion-resistant, surgical stainless steel

Accessories

None

Contraindications

The Hahn Tapered Implant Surgical Adaptor should only be used for the application described.

Sterility

Hahn Tapered Implant Surgical Adaptors are shipped NON-STERILE. Non-sterile items must be cleaned, disinfected, and sterilized prior to clinical use, according to a validated method.

  • Cleaning: Wash using a broad spectrum cleaning solution, followed by thorough rinsing and drying.

The recommended disinfection process is based on ANSI/AAMI ST79 guidelines, as follows:

  • Disinfection: Immerse abutments in disinfectant1, rinse with distilled water and dry.

The recommended sterilization process is based on the ANSI/AAMI/ISO 17665-1 and ANSI/AAMI ST79 guidelines, as follows:

  • Sterilization: Gravity-fed sterilizers: Autoclave in sterilization pouch for 30 minutes at 121°C (250°F)2. Devices are to be used immediately after sterilization.

NOTE: The validated procedures require the use of FDA-cleared sterilization trays, wraps, biological indicators, chemical indicators, and other sterilization accessories labeled for the sterilization cycle recommended. The healthcare facility should monitor the sterilizer for the facility according to an FDA-recognized sterility assurance standard such as ANSI/AAMI ST79.

1Oral disinfectant containing Chlorhexidine is recommended; refer to the disinfectant manufacturer's instructions. 2ANSI/AAMI ST79

Technical Specifications

Connection Type: Standard 4 mm square male / 4 mm female hex

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page