Product Code: 70-1153-PRC0035
Guide Pin
Prismatik Dentalcraft

Product Description

Hahn Tapered Implant Guide Pins are threaded fasteners used to attach implant prosthetic components to dental implant fixtures or implant analogs. Guide pins are reserved for provisional applications, to attach prosthetic components to an implant analog captured in a working model during laboratory fabrication processes, or, after sterilization, to temporarily attach a Hahn Tapered Implant Open-Tray Impression Coping to an endosseous dental implant during a direct transfer procedure.

  • Precisely machined from titanium alloy and is specific to the system or the restorative platform of the seated implant

Accessories

None

Contraindications

Hahn Tapered Implant Guide Pins are not intended for use in the oral environment, except to temporarily attach a Hahn Tapered Implant Open-Tray Impression Coping to an endosseous dental implant during a direct transfer procedure. Any guide pin placed intraorally should be sterilized prior to use.

Sterility

Hahn Tapered Implant Guide Pins are shipped NON-STERILE. Non-sterile items must be cleaned, disinfected, and sterilized prior to clinical use, according to a validated method.

  • Cleaning: Wash using a broad spectrum cleaning solution, followed by thorough rinsing and drying.

The recommended disinfection process is based on ANSI/AAMI ST79 guidelines, as follows:

  • Disinfection: Immerse abutments in disinfectant1, rinse with distilled water and dry.

The recommended sterilization process is based on the ANSI/AAMI/ISO 17665-1 and ANSI/AAMI ST79 guidelines, as follows:

  • Sterilization: Gravity-fed sterilizers: Autoclave in sterilization pouch for 30 minutes at 121°C (250°F)2. Devices are to be used immediately after sterilization.

NOTE: The validated procedures require the use of FDA-cleared sterilization trays, wraps, biological indicators, chemical indicators, and other sterilization accessories labeled for the sterilization cycle recommended. The healthcare facility should monitor the sterilizer for the facility according to an FDA-recognized sterility assurance standard such as ANSI/AAMI ST79.

1Oral disinfectant containing Chlorhexidine is recommended; refer to the disinfectant manufacturer's instructions. 2ANSI/AAMI ST79

Technical Specifications

Platform: Ø3.0

Material Composition: Titanium alloy (Ti6Al4V)

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page