Product Code: 70-1048-COM0126
Scanning Abutment
Prismatik Dentalcraft

Product Description

Inclusive Scanning Abutments are used to transmit highly accurate position and angulation data of seated implants when scanned with an intraoral or desktop digital scanner. Each scanning abutment consists of an abutment body manufactured from biocompatible PEEK material. Retained within the abutment body by internal threading is a screw manufactured from titanium alloy. An Inclusive Scanning Abutment is attached to the implant utilizing the internal screw, which is compatible with the restorative instrumentation of the specified implant system. Always use the internal screw to attach the scanning abutment to the implant, tightening the screw to hold the scanning abutment in place. Hand-tighten only, using the appropriate driver. Do not tighten using torque instruments. Each scanning abutment is specific to the restorative platform of the seated implant.

Clinical Scanning Abutments containing a radiopaque, barium-sulfate material, are designed for chairside use with intraoral scanners. Connected to the original implant body, their opacity on a radiograph allows accurate confirmation of complete seating. Smaller heights are available to accommodate ease of attachment in the posterior arch. Placed intraorally (attached to an implant in a patient’s mouth), Inclusive Scanning Abutments are intended for single use only. Multiple use in a clinical setting is contraindicated due to potential scan inaccuracies and the risk of cross-contamination.

Laboratory Scanning Abutments, available for both red-light and blue-light desktop scanners, are produced from radiolucent material, and are designed to be used with implant analogs on a stone model. They may also be used chairside, but may be difficult to observe radiographically. Used in the laboratory (attached to an implant analog in a working cast), Inclusive Scanning Abutments may be considered multiple-use devices. Inspect each scanning abutment prior to use. Do not use a scanning abutment that is damaged or unclean.


Each Inclusive Scanning Abutment is packaged with a captured screw.


Inclusive Scanning Abutments should not be used for elastomeric impressions or bite registrations.


Inclusive Scanning Abutments are packaged NON-STERILE. Prior to use in the oral environment, they should be cleaned, disinfected, and sterilized according to an FDA-recognized sterility assurance standard such as ANSI/AAMI ST79.

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page