Product Code: 70-1153-PRC0057
Prosthetic Driver
Prismatik Dentalcraft

Product Description

A Hahn Tapered Implant Prosthetic Driver is intended for use in the seating and rotation of implant-related prosthetic components.

  • Machined from corrosion-resistant, surgical stainless steel
  • Features a standard 4 mm male square connection

Accessories

None

Contraindications

Following successful implant placement, verify primary stability before proceeding with the delivery of a permanent or provisional prosthesis.

Sterility

Hahn Tapered Implant Prosthetic Drivers are shipped NON-STERILE. Non-sterile items must be cleaned, disinfected, and sterilized prior to clinical use, according to a validated method.

  • Cleaning: Wash using a broad spectrum cleaning solution, followed by thorough rinsing and drying.

The recommended disinfection process is based on ANSI/AAMI ST79 guidelines, as follows:

  • Disinfection: Immerse abutments in disinfectant1, rinse with distilled water and dry.

The recommended sterilization process is based on the ANSI/AAMI/ISO 17665-1 and ANSI/AAMI ST79 guidelines, as follows:

  • Sterilization: Gravity-fed sterilizers: Autoclave in sterilization pouch for 30 minutes at 121°C (250°F)2. Devices are to be used immediately after sterilization.

NOTE: The validated procedures require the use of FDA-cleared sterilization trays, wraps, biological indicators, chemical indicators, and other sterilization accessories labeled for the sterilization cycle recommended. The healthcare facility should monitor the sterilizer for the facility according to an FDA-recognized sterility assurance standard such as ANSI/AAMI ST79.

1Oral disinfectant containing Chlorhexidine is recommended; refer to the disinfectant manufacturer's instructions. 2ANSI/AAMI ST79

Technical Specifications

Size: Unigrip

Length: Short

Connection Type: Standard 4 mm male square

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page