Product Description

The Hahn^™ Tapered Implant Guided Pilot Drill is designed for guided dental implant surgery. If placing a Hahn Tapered Implant that is 3.5 mm in diameter or greater, it is used to deepen the osteotomy. Each Guided Pilot Drill is labeled according to the diameter of the implant for which it is intended to be used.

• Machined from corrosion-resistant, surgical stainless steel
• Features standard ISO latch connectivity and a flange stop for depth control
• Designed to achieve maximum cutting efficiency while effectively removing bone from the osteotomy

Accessories

None

Contraindications

Patients should be evaluated before the time of surgery for factors that put them at risk from the implant placement procedure, or that may affect healing of bone or surrounding soft tissue. Contraindications include but are not limited to: vascular conditions, uncontrolled diabetes, clotting disorders, anticoagulant therapy, metabolic bone disease, chemotherapy or radiation therapy, chronic periodontal inflammation, insufficient soft tissue coverage, metabolic or systemic disorders associated with wound and/or bone healing, use of pharmaceuticals that inhibit or alter natural bone remodeling, any disorders which inhibit a patient's ability to maintain adequate daily oral hygiene, uncontrolled parafunctional habits, insufficient height and/or width of bone, and insufficient interarch space.

Do NOT use any drill that exceeds the diameter or length of the prescribed implant.

Sterility

Hahn Tapered Implant Guided Pilot Drills are shipped NON-STERILE. Non-sterile items must be cleaned, disinfected, and sterilized prior to clinical use, according to a validated method.

• Cleaning: Wash using a broad spectrum cleaning solution, followed by thorough rinsing and drying.

The recommended disinfection process is based on ANSI/AAMI ST79 guidelines, as follows:

• Disinfection: Immerse abutments in disinfectant¹, rinse with distilled water and dry.

The recommended sterilization process is based on the ANSI/AAMI/ISO 17665-1 and ANSI/AAMI ST79 guidelines, as follows:

• Sterilization: Gravity-fed sterilizers: Autoclave in sterilization pouch for 15 minutes at 132^°C (270^°F). Allow sterilized components to dry for at least 30 minutes.

NOTE: The validated procedures require the use of FDA-cleared sterilization trays, wraps, biological indicators, chemical indicators, and other sterilization accessories labeled for the sterilization cycle recommended. The healthcare facility should monitor the sterilizer for the facility according to an FDA-recognized sterility assurance standard such as ANSI/AAMI ST79.

¹Oral disinfectant containing Chlorhexidine is recommended; refer to the disinfectant manufacturer's instructions.

Technical Specifications

Diameter: 3.5 mm

Length: 10 mm

Connection Type: Standard ISO latch

Pilot Drills should be used in proper succession, beginning with Pilot Drill A. Do NOT use any drill that exceeds the diameter or length of the prescribed implant.