You have no items in your shopping cart.
Hahn Tapered Implant Titanium Abutments are prefabricated, screw-retained intraoral abutments intended to be connected directly to an endosseous implant for retention of a cemented dental prosthesis. They may be indicated for single- and multiple-tooth restorations. Titanium abutments are precisely machined from titanium alloy and attached to the implant fixture with a titanium screw. For use in any region of the mouth, they contain a standard, circular emergence profile and straight abutment body available in 4.5 mm and 6 mm vertical height options. Each abutment is specific to the restorative platform of the seated implant.
The following conditions would contraindicate use of Hahn Tapered Implant Titanium Abutments:
Hahn Tapered Implant Titanium Abutments are shipped NON-STERILE. Non-sterile items must be cleaned, disinfected, and sterilized prior to clinical use, according to a validated method.
The recommended disinfection process is based on ANSI/AAMI ST79 guidelines, as follows:
The recommended sterilization process is based on the ANSI/AAMI/ISO 17665-1 and ANSI/AAMI ST79 guidelines, as follows:
NOTE: The validated procedures require the use of FDA-cleared sterilization trays, wraps, biological indicators, chemical indicators, and other sterilization accessories labeled for the sterilization cycle recommended. The healthcare facility should monitor the sterilizer for the facility according to an FDA-recognized sterility assurance standard such as ANSI/AAMI ST79.
1Oral disinfectant containing Chlorhexidine is recommended; refer to the disinfectant manufacturer's instructions. 2ANSI/AAMI ST79
Height: 6 mm
Platform: Ø7.0
Material Composition: Titanium alloy (Ti6Al4V)